Treetino
We are building sustainable energy power plants shaped as trees, with solar panels as leaves, transparent wind turbines and a smart RWA blockchain layer for investing.
视频
技术栈
描述
Treetino - the future of energy rooted in sustainability
We have been working on this project for many years. The initial vision comes from Dominik when he was walking through a carpark and he though all of that empty space could be used better. Because he is working in th the Energy market he designed a sustainable powerplant shaped as a tree. 60 deisgns later and 40k usd invested in bootstrap mode we arived to the design of Treetino V1:
For this design we were able to finally get support by wining a goverment grant of 200k EUR from Czech Invest. We got lucky and fited into the grant criteria even blochain integrations for decentralized energy market and energy sharing for which we have 30k commited that with about 10k already alocated to early research worked provided by our partner Artiffine - Web3 development agency.
Talking to our softcomited VCs we have kept working on the product and came up with a smaller design that directly slots into an existing market. It is a complete killer product though because it has at least 3x better cost/energy production ratio than our closest competetior finally creating a visually apealing, space efficient and economically viable renewable energy source for clients such as urban corporations, logistic hubs with bad roofs or already maximized companies with higher energy needs than the solar panels on their roofs can satistfy. That is how Treetino V2 was born:
Now the fastest GTM strategy is through our small windturbines that are uniquely deisgned for our trees but also other urban enviroments. They are uniquely efficient even at lower wind speeds and are completely silent. The development of these is going right now supported by CTU (Czech Technical University) and FZU (Institute of Physics of the Czech Academy of Sciences).
The first turbines that are curently tested in windtunels and printed out on carbon fiber 3D printers are going to be ready to tokenize and install by the end of February with our academically run testing numbers promising around 20% anual yeilds making it by far the most attractive product from the RWA perspective to start with.
Because I can't add pictures to the next section about the progress during the hackathon I will add pictures here to show what we have been doing during it and I'll explain there in text.
